VIVO Y18 LCD Screen with Digitizer Glass Combo Replacement Guide

The VIVO Y18 is one of the most reliable smartphones. However, similar to all other mobile phones, it faces damages after some time, especially the LCD screen and digitizer glass. Whether your phone has suffered from a drop that may result in cracked displays or an unresponsive touchscreen, a screen and digitizer combo replacement is the best way to go if you want to restore full functionality.

Herein lies the ultimate replacement guide for the VIVO Y18 display: how to replace the LCD screen with a digitizer glass combo, common issues, and how to maintain your new screen after installation.

Understanding VIVO Y18 Display and Digitizer Combo

The display of the VIVO Y18 is an LCD one, while the size is 6.5 inches, and the resolution is HD+. Thus, it provides clear visuals with vivid colors and would be quite enough for daily use. The digitizer glass covers the touch-sensitive layer, which reads your finger's movement across the screen. The LCD screen and the digitizer glass merge into one unit. When any part of this unit is broken, it will need to be replaced wholly in order to regain both visual and touch functions.

Key Features of the VIVO Y18 Display Screen:

• Resolution: HD+ for crystal clear images
• Touch Sensitivity: Highly responsive from the digitizer glass
• Brightness and Clarity: Ideal for indoor and outdoor use
• Common Issues That Occur in Display and Touch of the VIVO Y18

Even though the built quality of VIVO Y18 is quite good, it is not impervious to all issues that affect the screen. Some of the commonest problems are;

1. Cracked or Shattered Screen

A cracked screen is one of the most common problems with smartphones. If your VIVO Y18 has gone through such a fall, which has led to a crack or shatter on the screen, it will not only impede the aesthetic view but can also lead to unresponsive touches or dead spots on the screen.

2. Non-responsive Touchscreen

The digitizer glass can break, which renders it either unresponsive or laggy to touch on the phone.

3. LCD Failure

The LCD screen can also get flawed in the form of flickering, dead pixels, or even screen blackout, which eventually makes the phone completely useless for you.

4. Ghost Touch

This is when the screen starts to register touches that are not from you. Further on down the line, your gadget might behave erratically. Ghost touch is usually caused by a harmed digitizer glass.

5. Water Damage

When water or moisture reaches the VIVO Y18, the LCD screen and digitizer glass may get damaged, causing a malfunction in touch or discoloration of the display.

When to Replace the VIVO Y18 LCD Screen with Digitizer Glass Combo

Consider replacing the LCD and digitizer combo on your VIVO Y18 for the following problems:

The screen is cracked or shattered, making it hard to view or touch.

The touchscreen is unresponsive or laggy; a simple restart of the phone doesn't work.

Constant display issues like flickering, blackout, or dead pixels.

Water damage has caused problems in the display or touch sensitivity.

Ghost touches, making it hard to use the phone.

Replace VIVO Y18 LCD Screen with Digitizer Glass Combo step by step. Steps for Replacing

1. Prepare the Tools and Replacement Parts

To start with, prepare the right tools and replacement parts for your VIVO Y18:

New VIVO Y18 LCD Screen with Digitizer Glass Combo.

Precision screwdriver set.

Suction cup or plastic prying tool.

Plastic spudger tool for removing sensitive components.

Adhesive strips or glue to secure the new screen in place.

Heat gun-for softening the adhesive, but this is optional.

2. Switch your phone off

First of all, switch your VIVO Y18 off before starting any repairs in order to avoid a short circuit or damage to internal components.

3. Remove the Back Cover

Carefully pry the back cover of the phone, using either a suction cup or a plastic prying tool. If the adhesive is strong, slightly heat the edges with a heat gun. Be very gentle in this step to avoid breaking the back cover or any other internal parts.

4. Battery Disconnection

Access the internal parts of the phone and disconnect the battery to prevent the flow of electric current within the phone when working on the replacement of the display.

5. Removal of the Display which is Broken

Using the prying tool, carefully lever and remove the damaged LCD and digitizer combo from the frame of the phone. If the screen is held in by adhesive, then use a heat gun to loosen it carefully. Be careful in this step not to damage other components.

6. Install the New LCD Screen and Digitizer Glass Combo

Carefully take the new LCD screen with digitizer glass combo and align it with the frame of the phone, ensuring that all the connectors are in the correct position and are attached well. Apply adhesive or original adhesive strips to secure the new screen tightly to the frame.

7. Reconnect the Battery and Test the New Screen

Once the screen is correctly fitted in, attach the battery back, turn the phone on, and see if the display will appear as clear as possible and maybe test it for responsiveness. Check if it contains any dead spots or unresponsive areas.

8. Seal the Phone

Once the new screen has been tested to be in order, replace the back cover with a light press down enough to ensure it securely seals.